ANC International Co., Limited
ANC International Co., Limited Reliable Manufacturer & Supplier for Various Fiber Optic Products
Add to Cart
8 Fiber 12 Fiber 36-Fiber MPO to LC Uni-boot Fiber Optic Fanout Cable
Description:
8 Fiber 12 Fiber 36-Fiber MPO to LC Uni-boot Fiber Optic Fanout Cable Assembly manufactured by ANC International Co., Limited allows you an affordable way to enhance your networking setup for accommodating ever-increasing bandwidth demands without needing an expensive, major overhaul. This fiber optic patch cord comes in a roller "Type-B" polarity. Rollover polarity is used primarily for connecting to switches and transceivers in 40G/100G/128G applications. In a 12-strand rollover polarity, the cable is wired from Pin 1 on one connector end to Pin 12 on the opposite end. Then 2 to 11, and so forth. All our mpo fiber optic patch cords are assembled to meet industry performance standards. Each product is individually tested to make sure you receive the highest quality, and the results of each test are included with the product.
The MPO fanout patch cord is comprised of one MPO female connector on one end and 4pcs LC uniboot fiber connectors on the other end. The MPO fanout cables utilize 8 core multimode fibers to fully transmit 40GBASE-eSR4, 4 fibers in each direction transmitting at 10Gbps. The fiber optic fanout cable conforms to Method B (Cross-Connect) polarity, and MTP® connector is available upon request. This multimode MPO to 4xLC uniboot fanout cable is suitable for use in 100G QSFP28 SR4 to 25G SFP28 SR or 40G QSFP SR4 to 10G SFP+ SR transceiver. This fanout patch cord is an ideal solution for data distribution in current data center; These MPO MTP fanout cable assembly can be configured with 8fiber 12 fiber, 24 fiber, MPO MTP connectors. They are available in both male and female version. This MPO Fanout cable assemblies are available in OM3, OM4 or SM fiber in lengths of 5, 10, 25 meters, custom lengths are available on request.
Single mode 9/125µm is optimized for long range (LR) distances, while multimode is only capable of short range (SR) data transfer.
Features:
Used for the transition between trunk backbone assemblies and fiber rack system;
Standard loss or Elite loss MPO/MTP optional
MPO or MTP optional
100% inteferemeter pass before shipping
100% tested for low insertion loss performance and high return loss
Factory-terminated provide consistent quality, high performance and reduce installation time
Save Time & Space with MPO and uniboot LC connectors
SM G657A1, G657A2, OM3, OM4, OM5 or customized fiber optional
Comply with IEC 61754-7, TIA/EIA 604-5, Telcordia GR-1435-CORE and RoHS
LSZH Jacket by Default
Customized furcation length to cater for different installation situations
Applications:
Telecommunication
Data Center
LAN, FTTX
CATV
Optical Performance:
| MPO/MTP | SM Standard | SM Low Loss | MM Standard | MM Low Loss | |
| Insertion Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
| Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB | |
| Return Loss | APC≧50dB | ≧25dB | ≧35dB | ||
| PC≧40dB | |||||
| Durability | ≤0.3dB (change 500matings) | ≤0.3dB (change 1000matings) | |||
| Exchangeability | ≤0.3dB (Connector randomly) | ||||
| Tensile Strength | ≤0.3dB (Max 66N) | ||||
| Vibration | ≤0.3dB (10~55Hz) | ||||
| Operation Temperature | -40℃ ~ +75℃ | ||||
Generic Connector Performance:
| LC, SC, FC, ST Connector | Singlemode | Multimode | |
| UPC | APC | PC | |
| Maximum Insertion Loss | ≤ 0.3 dB | ≤ 0.3 dB | ≤ 0.3 dB |
| Typical Insertion Loss | ≤ 0.2 dB | ≤ 0.2 dB | ≤ 0.2 dB |
| Return Loss | ≧ 50 dB | ≧ 60 dB | ≧ 25 dB |
| Operating Temperature | -40℃ ~ +75℃ | ||
| Test Wavelength | 1310nm | 850nm | |
