HP Compatible Fiber Optic Transceiver 10GBASE-SR SFP+ Module MMF 850nm 300m
Description
HP Compatible 10GBASE-SR SFP+ Transceiver Module MMF 850nm 300m LC manufactured by ANC International Co., Limited is supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible. 10Gb/s SFP+ SR optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fiber Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The SFP+ SR is a "limiting module", i.e., it employs a limiting receiver. The 10G SFP+ SR optical transceiver is compliant per the RoHS Directive 2011/65/EU.
Features
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5 Gb/s bit rates (contact Finisar for higher data rate support)
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Single 3.3V power supply
Maximum link length of 400m on OM4 MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Commercial temperature range: -5°C to 70°C
Applications
10GBASE-ER at 10.3125Gbps
10GBASE-EW at 9.953Gbps
Other optical links
Optical Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Units |
| Transmitter Section |
| Center Wavelength | lo | 840 | 850 | 860 | nm |
| RMS Spectral Width | Dl | - | - | 0.45 | dB |
| Average Output Power | Po | -5 | - | -1 | dBm |
| Extinction Ratio | Er | 3 | - | - | dB |
| Dispersion Penalty | | | | 3.9 | dB |
| Relative Intensity Noise | RIN12OMA | | | -128 | dB/Hz |
| Total jitter | Tj | IEEE 802.3ae | |
| Receiver Section |
| Center Wavelength | lo | | 850 | | nm |
| Receiver Sensitivity | Rsen | | | -11.5 | dBm |
| Stressed Sensitivity | Rsen | | | -10.5 | dBm |
| Receiver Overload | Rov | 0 | | | dBm |
| Return Loss | | 12 | | | dB |
| LOS Assert | LOSA | -17 | | | dBm |
| LOS Dessert | LOSD | | | -15 | dBm |
| LOS Hysteresis | | 0.5 | | 4 | |
Notes:
(Ambient Operating Temperature 0°C to +70°C, Vcc =3.3 V)
